•  

Power Pack Electromagnetic Current Generators with 3-Phase FWDC Magnetization

The CD-Series is our line of magnetic power packs for magnetic particle inspection.

These stationary magnetizing current generators are power pack versions of our wet bench units to effectively magnetize parts while keeping power requirements to a minimum.

CD-Series units are ideal for large parts which will not fit easily on a wet bench or for parts that require special handling.

CD-Series power packs are available in two configurations: CD-2100 and CD-2100HV. Click on the tabs below for more details on these configurations.

Benefits

  • Most economical way to create a high magnetizing current with minimal power requirements
  • For parts too large for traditional wet horizontal units or parts that need special handlin

Features

Exterior

  • Current Assurance Indicator
  • Large, easy to read Digital Ammeter Display
  • Sturdy Flat top, use as a convenient work surface
  • Ergonomic Display and Control Panel
  • Remote Mag Receptacle (Use with ZB-100FMB)
  • Dual 115 volt Accessory Outlets

Interior

  • PLC control advanced technology; reduce components and increase reliability
  • Modular digital solid state circuitry
  • Quick Break Circuitry
  • Liquid Resistant panels, allow ventilation while inhibiting fluid intrusion

Compare CD-Series units with our Stationary Power Pack Equipment Comparison chart.

  • CD-2100 
  • CD-2100HV 

CD-2100

Specifications

  • 10,000 amp 3-phase rectified to FWDC output
  • Duty Cycle 0.5 seconds on, 20 Seconds off (2.5% with Maximum of 5 seconds)
  • Ultra Low Frequency reversing DC Demagnetization
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, three phase power
  • Minimum 80 PSI with 5 SCFM capability
  • 60” (153 cm) x 31” (79 cm) Foot Print, allow 24” (61 cm) per side for ventilation
  • Pulsed Output (1/2 sec ON – 1 sec OFF for 10 cycles)

Optional Features

  • NRTL Certification to CSA C22.2 No. 61010-1


Request a Quote
 

Product Data Sheet

CD-2100HV

Specifications

  • 10,000 amp 3-phase FWDC current output
  • Duty Cycle 0.5 seconds on, 10 Seconds off (5% with Maximum of 5 seconds)
  • Ultra Low Frequency reversing DC Demagnetization
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, three phase power
  • Minimum 80 PSI with 5 SCFM capability
  • 60” (153 cm) x 31” (79 cm) Foot Print, allow 24” (61 cm) per side for ventilation
  • Pulsed Output (1/2 sec ON – 1 sec OFF for 10 cycles)

Optional Features

  • NRTL Certification to CSA C22.2 No. 61010-1


Request a Quote
 

Product Data Sheet

Please wait while we gather your results.

Related Products

Magnetic Particle Consumables

Consumables

For magnetic particle inspection

Magnaflux Magnetic Particle Equipment Demagnetizer

Demagnetizers

For removing residual magnetism

Magnaflux Magnetic Particle Testing Cables Connectors

Cables & Connectors

For magnetic benches and power packs

Prods & Clamps

For use with power packs and current generators

Field Indicators

For measuring magnetic field strength and direction

Magnetic Particle Applicators

To apply magnetic particle bath suspensions

Meters

To measure magnetizing equipment performance and accuracy

Subscribe to Magnaflux News:

Magnaflux

155 Harlem Avenue
Glenview, IL 60025, USA
Telephone: +1 847-657-5300
Fax: +1 847-657-5388
Contact Magnaflux Customer Service

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
© 2018 Magnaflux - all rights reserved.
top

We have placed cookies on your computer to give you the best possible experience with our website. These cookies are also used to ensure we show you advertising that is relevant to you. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.