•  

Economical Power Pack Magnetic Current Generators

P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.

These portable electromagntic current generators are ideal for inspecting large or heavy parts, in-service mobile equipment or job-site weld testing with magnetic particle inspection NDT method.

P-Series power packs are availble in two configurations P-70 and P-1500 to meet a variety of mag particle inspection needs. Click on the tabs below for more details on these configurations.

Benefits

  • Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
  • Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
  • Infinitely variable current control
  • Demagnetize parts in AC mode by slowly turning the current dial to zero
  • Built-in automatic-reset circuit breaker
  • May be used as the main power source for the Mag Kit modular bench inspection system
  • Comes standard with 15 ft / 4.5 m remote control cable

Comparison

 

 

P-70

P-1500

Contact Current Capacity (amps)* AC 750 1,500
HWDC  750 1,500
Dimensions 17.5 x 9 x 7.5 in /
44.5 x 23 x 19 cm
22 x 9.5 x 9.5 in /
56 x 24 x 24 cm
Weight 35 lb / 16 kg 93 lb / 42 kg

* Rated with 2 sets of 15 ft / 4.6 m of 4/0 cable

  • P-70 
  • P-1500 

P-70

Specifications

  • Length: 17.5" (44.5 cm)
  • Width: 9" (22.9 cm)
  • Height: 8" (20.3 cm)
  • Maximum Output*: 750 amps, AC or HWDC
  • Available Voltages: 115,230, 50 or 60 Hertz; single phase power
  • Line Current: 26 amps @ 115 VAC; 13 amps @ 230 VAC
  • Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
  • Unit Weight: 35 lbs (15.9 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately. 

 

Part Numbers

P-70, 115V     190575

P-70, 230V     190575-01


Request a Quote
 

Product Data Sheet

P-1500

Specifications

  • Length: 22" (55.9 cm)
  • Width: 9.5" (24.1 cm)
  • Height: 9.5" (24.1 cm)
  • Maximum Output: 1500 amps, AC or HWDC
  • Available Voltages: 230,460, 50 or 60 Hertz; single phase power
  • Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC
  • Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
  • Unit Weight: 93 lbs (42.2 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately. 

 

Part Numbers

P-1500, 230V     198500

P-1500, 460V     198500-01


Request a Quote
 

Product Data Sheet

Please wait while we gather your results.

Related Products

Magnetic Particle Consumables

Consumables

For magnetic particle inspection

Magnaflux Magnetic Particle Testing Cables Connectors

Cables & Connectors

For magnetic benches and power packs

Prods & Clamps

For use with power packs and current generators

Field Indicators

For measuring magnetic field strength and direction

Subscribe to Magnaflux News:

Magnaflux

155 Harlem Avenue
Glenview, IL 60025, USA
Telephone: +1 847-657-5300
Fax: +1 847-657-5388
Contact Magnaflux Customer Service

Select Your Country North America Mexico Brazil China Europe Russia India New Zealand, Australia, Japan, Southeast Asia
© 2018 Magnaflux - all rights reserved.
top

We have placed cookies on your computer to give you the best possible experience with our website. These cookies are also used to ensure we show you advertising that is relevant to you. If you continue without changing your settings, you are agreeing to our use of cookies to improve your user experience. You can click the cookie settings link on our website to change your cookie settings at any time.