Click image to enlarge

ZR-10E

Hydrophilic Emulsifier

Designed to remove excess surface penetrant, ZR-10E minimizes surface background during Method D fluorescent penetrant testing while protecting indication integrity in critical component inspections. ZR-10E provides long tank life and excellent solution consistency for dependable, long-lasting performance in a variety of applications.

This Method D remover reduces fluorescent background on rough surfaces and minimizes penetrant bleed-out from hollow parts.

ZR-10E is tested and approved to AMS 2644 to work with Magnaflux PE penetrants ZL-2C Level 2, ZL-27A Level 3 and ZL-37 Level 4 for verified penetrant system reliability.

ZR-10E is listed on the QPL SAE AMS 2644 Qualified Product List and is approved for use by Pratt & Whitney.

Benefits

Maximize penetrant inspection process control

PE penetrant system is less susceptible to human error since ZR-10E only works with rinse water to remove excess surface penetrant
Tested and confirmed per AMS 2644 to work with Magnaflux PE penetrants for verified penetrant system reliability
Maintains solution consistency for dependable performance with minimal agitation

Wide range of inspections

Flexible to work with many types of equipment and application methods
Inspect a wide range of high-value components without fear of corrosion or specification non-conformance
Meets all major industry and NDT specification requirements, including Aerospace Prime and OEM specs, AMS 2644 and ISO 3452

Features

Hydrophilic emulsifier
Reduces bleed-out on hollow parts
Lower concentration required
Resist degradation from bacteria, fungus or other contaminants
QPL SAE AMS 2644 Qualified Product List
Approved for use by Pratt & Whitney

Ordering Information

5 gal / 18.9 L01-3625-40

20 gal / 75.7 L drum01-3625-30

55 gal / 208 L drum01-3625-45

Product Properties

NDT TypeFluorescent Penetrant Testing, Visible Penetrant Testing

Penetrant TypeType 1, Type 2

Applications

Ideal ApplicationCastings, Detecting fine to very-fine discontinuities, High-stress parts, Investment castings, Precision components, Safety-critical components, Turbine engine blades, disks, etc.

Defect ExamplesCracks, Porosity, Scratches, Seams

Compliance

StandardsAECL, AMS 2644, AMS 2647, ASME BPVC, ASTM E1417, Boeing BAC 5423 PSD 6-46 or 8-4, Boeing PS-21202, GE P3TF2, GE P50YP107, Honeywell EMS 52309, NAVSEA T9074-AS-GIB-010/271, Pratt & Whitney 4355