Magnaflux>
P-Series

Click image to enlarge

P-Series

Economical Power Pack Magnetic Current Generators

P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.

These portable electromagntic current generators are ideal for inspecting large or heavy parts, in-service mobile equipment or job-site weld testing with magnetic particle inspection NDT method.

P-Series power packs are availble in two configurations P-70 and P-1500 to meet a variety of mag particle inspection needs. Click on the tabs below for more details on these configurations.

Comparison

		P-70	P-1500
Contact Current Capacity (amps)*	AC	750	1,500
Contact Current Capacity (amps)*	HWDC	750	1,500
Dimensions		17.5 x 9 x 7.5 in / 44.5 x 23 x 19 cm	22 x 9.5 x 9.5 in / 56 x 24 x 24 cm
Weight		35 lb / 16 kg	93 lb / 42 kg

* Rated with 2 sets of 15 ft / 4.6 m of 4/0 cable

Benefits

Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
Infinitely variable current control
Demagnetize parts in AC mode by slowly turning the current dial to zero
Built-in automatic-reset circuit breaker
May be used as the main power source for the Mag Kit modular bench inspection system
All P-70 and P-1500 portable power packs come with a 15 ft / 4.5 m remote control cable (PN 626797)

Part Numbers

Product Name	Specifications	Part Number
P-70	Length: 17.5" (44.5 cm) Width: 9" (22.9 cm) Height: 8" (20.3 cm) Maximum Output*: 750 amps, AC or HWDC Available Voltages: 115,230, 50 or 60 Hertz; single phase power Line Current: 26 amps @ 115 VAC; 13 amps @ 230 VAC Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF Unit Weight: 35 lbs (15.9 kg) Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately.	115V: 628822 230V: 628826
P-1500	Length: 22" (55.9 cm) Width: 9.5" (24.1 cm) Height: 9.5" (24.1 cm) Maximum Output: 1500 amps, AC or HWDC Available Voltages: 230,460, 50 or 60 Hertz; single phase power Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF Unit Weight: 93 lbs (42.2 kg) Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately.	230V: 628824 460V: 628825

Product Name

Specifications

Part Number

P-70

Length: 17.5" (44.5 cm)
Width: 9" (22.9 cm)
Height: 8" (20.3 cm)
Maximum Output*: 750 amps, AC or HWDC
Available Voltages: 115,230, 50 or 60 Hertz; single phase power
Line Current: 26 amps @ 115 VAC; 13 amps @ 230 VAC
Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
Unit Weight: 35 lbs (15.9 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately.

115V: 628822

230V: 628826

P-1500

Length: 22" (55.9 cm)
Width: 9.5" (24.1 cm)
Height: 9.5" (24.1 cm)
Maximum Output: 1500 amps, AC or HWDC
Available Voltages: 230,460, 50 or 60 Hertz; single phase power
Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC
Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
Unit Weight: 93 lbs (42.2 kg)

Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately.

230V: 628824

460V: 628825

Ordering Information

P-70, 115V628822

P-70, 230V628826

P-1500, 230V628824

P-1500, 460V628825

Product Properties

NDT TypeFluorescent Magnetic Particle Testing, Visible Magnetic Particle Testing

Resources

Magnetic Particle Process Guide

How to Do Magnetic Particle Inspection

Magnetic Particle Inspection Reference Guide

P-Series

Economical Power Pack Magnetic Current Generators

P-70

P-1500

Benefits

Ordering Information

Product Properties

Resources

Related Products

Consumables

Cables

Connectors

Prods & Clamps

Field Indicators

Magnetic Particle Test Pieces

Magnaflux