September 26, 2017
<!--cke_bookmark_89S--><!--cke_bookmark_89E-->
The new ST700 LED UV light is engineered to nondestructive testing pros’ specifications to eliminate or prevent the most common UV illumination challenges fluorescent NDT testing.
Designed and tested by NDT professionals, the ST700 speeds up fluorescent NDT processes and improves inspection quality with an ultra-wide UV-A beam.
The ST700’s best-in-industry UV-A inspection area allows inspectors to quickly examine parts while minimizing part handling, especially with larger test parts, and the high intensity UV illumination helps indications stand out bright and clear for faster detection.
“The ST700 provides brighter UV light, runs cooler, uses less energy, and eliminates the disposing of hazardous mercury bulbs. It is very… We use our ST700 24 hours a day with 100% confidence,” says Joseph Michel, NDT Level 3.
The ST700 is a stationary LED inspection UV Lamp for fluorescent nondestructive testing.
Inspect more and see stronger indications thanks to the ultra-wide, 20 x 26 in / 50 x 66 cm beam and the high-intensity LEDs.
Maximize your range of inspection with Rolls Royce and ASTM certifications.
Multiple mounting and angling options allow you to customize this UV lamp to fit your NDT environment.
The ST700 is fully sealed to present dust and water ingress; and can be used in multiple industries, in any stage of the NDT process.
JOIN OUR MAILING LIST TO RECEIVE THE LATEST NDT INSIGHTS AND ARTICLES FROM MAGNAFLUX
As the NDT industry continues to modernize and evolve in the 21st century, sustainability has become a hot topic. For suppliers and consumers of NDT products, evaluating and adjusting processes and products, investing in innovative technologies, and putting sustainability at the forefront are critical.
Read More...
Step-by-step process listing everything from the equipment needed in magnetic particle testing and liquid penetrant testing to preparation for NDT audits
NRTL stands for Nationally Recognized Testing Laboratory, but what does that mean to you?
An overview of two of the most common standards for NDT UV light sources, ASTM E2297 and ASTM E3022.
4 things to consider when looking for a new LED UV light for fluorescent penetrant inspection or magnetic particle testing.
We highlight the 5 major sections to understand on a Safety Data Sheets (SDS) in accordance with US OHSHA Hazcom 2012 GHS regulations
Answering popular questions regarding shelf life for magnetic particle and liquid penetrant products used in nondestructive testing
Learn about the function and importance of UV-a pass filters, and why ASTM E3022 requires all LED UV-A lamps to have them.
Check out how Magnaflux’s EV6000 stacks against other leading UV-A portable handheld lamps in the market
Watch and listen to a 20-minute EV6000 demonstration by two outstanding NDT experts who afterwards host a 20-minute Q&A for participants to ask their own LED UV questions.
The ST700 Hood Mount is a freely-adjustable mounting frame to give operators the option to position their overhead UV-A Lamp to optimize inspection ease
See how the ST700 UV inspection lamp can eliminate the most common UV illumination challenges fluorescent NDT testing
Learn how to achieve a high intensity beam of light with UV LEDs for NDT inspection
User-check requirements for LED UV-A lamps, and how to plot the beam of an LED UV-A lamp for Airbus AITM6-1001 Issue 11
Learn how to comply with the new requirements of the latest revision of Airbus AITM 6-1001
In this article, we break down the ANSI/IEC 60529 Ingress Protection Code with a chart to show what's essential for NDT equipment
Frequently Asked Questions About NDT UV LED Lamps
An overview of Rev J changes to Nadcap AC7114 Non-Destructive Testing audit checklists for Penetrant and Magnetic Particle
See how an aerospace OEM manufacturer increased NDT inspection reliability & control with wide-beam, overhead LED UV-A lamps
See how an automotive parts manufacturer decreased inspection time and improved reliability with wide-beam, overhead UV lamps
Understanding the difference between NDT mercury-vapor lamp “warm-up” time and LED black light “stabilization” time
Learn about how the EV6500 UV lamp for nondestructive testing improves visibility & versatility while minimizing time to inspect parts
Learn how this new UV lamp for nondestructive testing solves the biggest challenges in fluorescent NDT UV illumination.
Most UV-A lamps on the market are set to provide 5,000 µW/cm2 at a distance of 15 in / 38 cm. What’s so special about those numbers?
A quick history of the visible light emissions requirement, where it is today, and an overview of UV meters
155 Harlem Avenue Glenview, IL 60025, USA Telephone: +1 847-657-5300 Contact Magnaflux Customer Service